4th and 5th generation quaternary ammonium

Quaternary ammonium (also called quat) is a broad-spectrum cationic disinfectant used to sanitize surfaces, equipment and facilities in the food, livestock, institutional and water treatment industries. Quimiconsult supplies 80% concentrated quats for formulators, ready-to-dilute Sanidet Diluye and benzalkonium chloride at 50% and 80%, with data sheets, SDS and shipping across Mexico from Monterrey.

At a glance

Generations
1st (benzalkonium), 4th and 5th
Concentrations
10, 50 and 80%
Packaging
20 and 50 kg jerrycan · 200 kg drum · 1000 kg tote
Documents
Data sheet and SDS

What is quaternary ammonium?

Quaternary ammonium compounds are salts with a nitrogen atom bonded to four organic groups. Their positive charge makes them cling to the membrane of bacteria, fungi and enveloped viruses and break it. Besides disinfecting, they have a detergent effect and a residual action on the surface. The best known is benzalkonium chloride; quats of later generations are blends of several salts that cope better with hard water and organic matter.

Which quat should I choose?

Product

What it is

Recommended for

Packaging

Benzalkonium chloride 50% and 80%

First-generation quat (a single salt), 50% or 80% active

Formulating general-purpose disinfectants and sanitizers when water and organic load are under control; best cost per kilo of active

20, 50, 200 and 1000 kg (80%: 20, 50, 200 and 950 kg)

Sanidet Crea 4th generation 80%

Synergistic blend of four twin-chain quaternary salts, alcohol-free

Formulators of sanitizers for the food, pharmaceutical, institutional and water treatment industries; better performance in hard water and with organic matter; non-flammable

20, 50, 200 and 1000 kg

Sanidet Crea 5th generation 80%

Twin-chain quats with ethanol as an activator

Demanding applications: persistent biofilm, cooling towers, farms, formulating high-performance sanitizers. It is a flammable liquid

20, 50, 200 and 1000 kg

Sanidet Diluye 10%

Sanitizer with 10% fifth-generation quats, ready to dilute

Food plants (meat, dairy, bakery, beverages) that do not formulate: just dilute in water. Kosher and SAGARPA registration

20, 50 and 200 kg

Saniplus

Glutaraldehyde + fifth-generation quaternary ammonium

Livestock disinfection: poultry houses, farms, footbaths, vehicles and equipment

20 kg jerrycan

Uses of quaternary ammonium

  • Food and beverage industry: sanitizing surfaces, equipment, utensils, floors and drains, and the final step of CIP and COP programs.

  • Livestock and poultry: disinfecting houses, pens, equipment, vehicles, footbaths and vehicle disinfection arches.

  • Institutional and industrial cleaning: raw material for formulating surface, floor and bathroom disinfectants.

  • Water treatment: controlling bacteria, algae and biofilm in cooling towers and recirculating systems.

How do you dilute it?

The dose is given in ppm of active quat in the use solution. To work out how much product to add, divide the target concentration by the product's concentration (1% = 10,000 ppm). Example: for 200 ppm with an 80% quat (800,000 ppm): 200 ÷ 800,000 × 1,000 = 0.25 g of product per liter of water.

Product

For 200 ppm active

For 400 ppm active

80% quat (Sanidet Crea 4th or 5th, benzalkonium 80%)

0.25 g/L

0.5 g/L

Benzalkonium chloride 50%

0.4 g/L

0.8 g/L

Sanidet Diluye 10%

2 g/L (0.2%)

4 g/L (0.4%)

Apply to surfaces that have already been cleaned and rinsed, keep the surface wet for the contact time given in the data sheet, and always add the product to the water, never the other way round. The dose for each application is on each product's page.

Safety and compatibility

Concentrated quats can cause burns or irritation to skin and eyes: handle them with gloves, goggles and protective clothing. Do not mix them with soaps or anionic detergents (they neutralize them) or with chlorine products. Sanidet Crea 5th generation contains ethanol and is flammable: store it away from ignition sources. Every product comes with a downloadable technical data sheet and safety data sheet (SDS).

Frequently asked questions

What is quaternary ammonium used for?
To disinfect and sanitize surfaces, equipment and facilities in food plants, farms, hospitals, institutions and cooling water systems. It is also a raw material for formulating disinfectants and sanitizers.
What is the difference between a 4th and a 5th generation quat?
Both are blends of several twin-chain quaternary salts that work better than benzalkonium chloride in hard water and with organic matter. At Quimiconsult, Sanidet Crea 5th generation adds ethanol as an activator, which improves its action on biofilm but makes it a flammable liquid; Sanidet Crea 4th generation contains no alcohol and is easier to store.
Is benzalkonium chloride a quaternary ammonium?
Yes. It is a first-generation quat made of a single salt (alkyl dimethyl benzyl ammonium chloride). "Quaternary ammonium" is the name of the whole family.
How do you dilute quaternary ammonium?
Divide the active concentration you need by the product's. For 200 ppm, use 0.25 g/L of an 80% quat, 0.4 g/L of 50% benzalkonium or 2 g/L of Sanidet Diluye 10%.
Can it be used in the food industry?
Yes, to sanitize surfaces and equipment, not in direct contact with food. On food-contact surfaces it is used without a rinse only within the concentration the applicable regulation allows; at higher concentrations, rinse with potable water. Sanidet Diluye holds Kosher certification and SAGARPA registration.
Where can I buy quaternary ammonium in Mexico, and at what price?
At Quimiconsult you can buy it online in a 20 or 50 kg jerrycan, a 200 kg drum or a 1000 kg tote, with volume pricing shown on each product and shipping across Mexico from Monterrey.

Have a question?

A specialist answers your questions about concentrations, dosing, packaging or volume pricing.

Message us on WhatsApp