SILAD X700 SILICONE-BASED INDUSTRIAL DEFOAMER FOR NON-AQUEOUS SYSTEMS

Silad X700 Description — Concentrated Silicone-Based Defoamer for Non-Aqueous Systems

At Quimiconsult we manufacture Silad X700, the highest-concentration silicone-based defoamer in the Silad line: an industrial concentrate with a minimum of 90% active ingredient (PDMS / dimethicone / dimethylpolysiloxane, CAS 63148-62-9), formulated to successfully suppress or prevent foam formation in a wide range of applications, with a special focus on non-aqueous systems and on processes that require durability under alkaline conditions. Extremely stable and easy to handle, with a self-dispersing formulation, Silad X700 excels in applications that require excellent durability in alkaline systems, with superior performance under neutral or acidic conditions as well. It delivers nearly pure PDMS in liquid form, suitable for direct dosing or for dilution in the medium of the system being treated, making it ideal for processes where conventional aqueous emulsion defoamers cannot be used or lose effectiveness due to incompatibility with the system base. As direct manufacturers with our own R&D laboratory and more than 30 years of experience in specialty chemicals, we guarantee lot-to-lot consistency, with availability from our plant in Monterrey, Nuevo León, and shipping throughout Mexico.

Foam is one of the most costly and underestimated operational problems in industry: it reduces the usable capacity of tanks, reactors, columns and evaporators; causes overflows, losses and shutdowns; interferes with pumps, sensors and control systems; and compromises the quality and stability of formulation, cleaning, milling, polymerization and separation processes. Silad X700 controls foam through the characteristic mechanism of silicone defoamers: PDMS droplets, with low surface tension (around 20 dynes/cm, far below that of the surrounding system) and insoluble in the foaming medium, enter the bubble interface, generate a spreading force that thins the film until it ruptures (defoaming action) and prevent new foam from forming (antifoam action). With a minimum active content of 90%, its effective dose is very low, which translates into a very competitive cost per unit of defoaming efficacy.

For those looking for how to eliminate foam in a non-aqueous system, a silicone-based defoamer, a concentrated PDMS defoamer, a defoamer for non-aqueous systems, a defoamer for alkaline cleaners and heavy-duty detergents, a defoamer for EC agrochemical formulations, a concentrated dimethicone defoamer or PDMS / dimethylpolysiloxane to buy in Mexico, Silad X700 is the technical answer in Quimiconsult's catalog, backed by in-house manufacturing, complete regulatory documentation and advice on dosing and evaluating the product in each process.

Dimethicone, PDMS and dimethylpolysiloxane: they are all the same compound

The terms dimethicone, PDMS, dimethylpolysiloxane and polydimethylsiloxane designate the same linear silicone polymer (CAS 63148-62-9), widely used in industry, cosmetics, pharmaceuticals and agrochemicals for its low surface tension, chemical inertness and excellent thermal stability. The difference between the various products containing this compound lies not in the molecule, but in the concentration and the presentation format:

• PDMS: industrial technical abbreviation (polydimethylsiloxane).
• Dimethicone: INCI and pharmaceutical name, used in cosmetics, pharmaceuticals and ingredient labeling.
• Dimethylpolysiloxane / polydimethylsiloxane: chemical name (dimetilpolisiloxano / polidimetilsiloxano in Spanish).
• Silad X700: the trade name for PDMS at a minimum 90% active concentration, in the viscosity (1,500 – 3,500 cP) and pH (3.0 – 4.5) format suited for use as an industrial defoamer in non-aqueous systems.

Silad X700 is the right choice when the system being treated is non-aqueous or contains solvents incompatible with PDMS-in-water emulsions; when a very low active dose is required thanks to the high concentration; when the process demands stability at challenging pH levels or temperatures; or when formulating a concentrate that will be diluted later and nearly pure active is needed to precisely control the final concentration. Grade note: although the PDMS active is recognized as an additive under various regulatory frameworks, Silad X700 is an industrial grade defoamer; for food-contact applications, the food grade versions of the family (Silad 210 FG or Silad Powder FG, manufactured in an SQF plant) must be used, and eligibility for each regulated application must be verified with our technical team.

Silad X700 within the silicone defoamer family

Quimiconsult's Silad line offers PDMS in different concentration and compatibility formats to cover the full spectrum of process systems:

• Silad X700 (min. 90% active, silicone-based, pH 3.0 – 4.5) — the product described on this page: a high-concentration, self-dispersing silicone-based concentrate for non-aqueous systems, heavy-duty alkaline cleaners, agrochemical formulations and specialty chemical processes.
• Silad X100 (100% active, self-dispersible, pH 5.0 – 7.0) — 100% active PDMS concentrate for oil-based, mixed oil-water, non-aqueous and aqueous systems.
• Silad B300 (silicone emulsion, 20% active, pH 3.5 – 5.0) — low-viscosity silicone defoamer emulsion for neutral to acidic aqueous systems; the equivalent water-based option.
• Silad B600 (silicone emulsion, 20% active, pH 5.0 – 8.0) — very low-viscosity silicone defoamer emulsion for aqueous systems with anionic surfactants or neutral to alkaline pH; ideal for automatic dosing.
• Silad B700 (silicone, 100% active) — concentrated silicone defoamer for water treatment, alkaline cleaners, CIP and emulsion formulation.
• Silad 210 and Silad 210 FG (silicone emulsion, 10% active) — emulsion foam control agents; the 210 FG version is food grade, kosher, manufactured in an SQF plant.
• Silad Powder FG (silicone powder, food grade) — food grade powder defoamer for dry mixes and food processes.
• Silad AF100 (organic-based, silicone-free) — concentrated organic defoamer for silicone-sensitive processes and products.

Silad X700 vs. Silad X100 vs. silicone emulsion: selection guide

The line's two high-concentration products, Silad X700 (min. 90% active) and Silad X100 (100% active), are self-dispersing silicone defoamers very close in efficiency. The practical difference lies in the application focus and the product profile:

• Silad X700 (min. 90% active, pH 3.0 – 4.5, viscosity 1,500 – 3,500 cP, specific gravity 0.94 – 0.95): the silicone-based concentrate geared to non-aqueous systems and to processes requiring durability in alkaline systems; diluted with PPG or as a dispersion in an aqueous medium.
• Silad X100 (100% active, pH 5.0 – 7.0, viscosity 2,000 – 6,000 cP): the maximum-active concentrate, geared to oil-based and mixed oil-water systems as well as aqueous ones; diluted in water and co-solvent.

Compared with 20% emulsions (Silad B300 / B600): if your system contains water as its main component and the defoamer can be added as an aqueous emulsion, a 20% emulsion offers the lowest cost per dose and easier handling. If your system is non-aqueous, contains solvents incompatible with aqueous emulsions, or requires a very precise and low active concentration, Silad X700 is the technically correct choice. If in doubt, our technical team can guide you and support the laboratory evaluation.

It is worth noting that, although the cost per kilogram of Silad X700 is higher than that of a 20% emulsion, its active content is approximately 4.5 times higher per kilogram of product (90% versus 20%), so the effective dose is much lower and the cost per application can be comparable or lower.

Why is PDMS the most effective defoamer at the lowest dose?

Dimethylpolysiloxane acts as a defoamer through a foam-film destabilization mechanism that sets it apart from conventional organic defoamers. When a PDMS particle comes into contact with the interface between the bubble and the liquid, its low surface tension (around 20 dynes/cm) is significantly lower than that of the surrounding system; this difference generates a spreading force that thins the bubble film until it ruptures, releasing the trapped gas.

Unlike defoamers based on mineral oils, esters or organic polymers, PDMS is inert: it does not react with system components, does not degrade at typical process temperatures and does not generate by-products that could contaminate the final product or interfere with other functions of the formulation. This chemical inertness is why PDMS is used in applications as diverse as heavy-duty detergents, agrochemical formulations and polymerization processes. Silad X700's viscosity of 1,500 to 3,500 cP is characteristic of long-chain PDMS, which offers a good balance between speed of action and persistence at the foam-liquid interface: lower-viscosity PDMS acts faster but persists less; higher-viscosity PDMS is more persistent but harder to disperse.

Key features and benefits of Silad X700

• High concentration: minimum 90% active ingredient (PDMS): maximum efficiency per unit dose; very low effective doses and competitive cost per application.
• Silicone base for non-aqueous systems: delivers nearly pure PDMS, compatible with solvents and systems where aqueous emulsions cannot be used.
• Self-dispersing formulation: good dispersion in the application system.
• Robust stability and great durability over a wide pH range: reliable performance in alkaline, neutral and acidic systems, with outstanding durability under demanding alkaline conditions.
• Excellent, cost-effective foam control for surfactant systems: dual defoaming and antifoam action, with long-lasting efficacy under demanding process conditions.
• Chemical inertness: does not react with system components or generate by-products, suitable for contamination-sensitive processes.
• Industrial grade, general-purpose reliability: a stable, easy-to-handle product with consistent performance and good stability when diluted.
• In-house manufacturing with quality control: lot-to-lot consistency and supporting documentation (COA per lot, TDS, SDS).

Systems where Silad X700 provides long-lasting foam suppression

Suitability and dosage for each case must be validated under the customer's specific conditions; our technical team can support the trials.

Alkaline cleaners and heavy-duty detergents

High-concentration alkaline cleaners, especially those formulated with sodium or potassium hydroxide and anionic surfactants at high pH, generate persistent foam during mixing and processing that interferes with the efficiency of the cleaning system. Thanks to its stability at demanding alkaline pH, Silad X700 can be incorporated directly at the cleaner manufacturing stage without losing efficacy during storage or use, supporting rinsing, recirculation and system performance.

Agrochemical formulations: suspension concentrates, EC and milling processes

In the manufacture of agrochemical formulations, foam is a critical problem in the wet milling of active ingredients, in the homogenization of suspension concentrates (SC) and in the dispersion of water-dispersible granules (WG). As a nearly pure PDMS concentrate with no aqueous base, Silad X700 is compatible with the organic solvents and co-solvents used in formulating emulsifiable concentrates (EC), where aqueous emulsion defoamers cannot be used. It effectively suppresses foam without interfering with emulsifier systems or the stability of the finished product.

Treatment of water with a high surfactant load

Industrial effluent treatment systems that receive water with high concentrations of detergents, surfactants and foaming agents generate foam in aeration tanks, separators and flotation systems. The PDMS in Silad X700, dosed directly at the point of foam formation or into the inlet stream, suppresses the foam-water interface without affecting biological treatment processes. For wastewater and chemical processing, the recommended initial evaluation is just 10 to 20 ppm of the product as received.

Polymerization processes and plastics manufacturing

In emulsion polymerization reactors and in high-agitation polymer compounding processes, foam interferes with product homogeneity and can cause reactor overflows. Silad X700 is suitable for these applications thanks to its stability at process temperatures (which can exceed 80 °C) and its chemical inertness toward the monomers and catalysts present in the reactor.

Chemical and petroleum / petrochemical processing

Silad X700 is used as a process defoamer in the chemical and petrochemical industries, in synthesis, refining and separation processes, and in high-temperature industrial fluid systems, where foam reduces capacity and compromises process stability. Its stability over a wide pH range and its chemical inertness make it suitable for demanding process streams.

Formulations and specialty chemicals

Silad X700 is also used in specialty chemical formulations, high-viscosity coatings, solvent-based inks and, in general, any industrial process where foam is an operational problem and where the system is non-aqueous or incompatible with aqueous emulsions. Validation under the customer's specific conditions is always recommended. (For coatings and systems sensitive to silicone-related surface defects, also consider the silicone-free option Silad AF100.)

How to dose and incorporate Silad X700

Application method: Silad X700 can be used as received (direct dosing), pre-diluted with PPG, or prepared as a dispersion in an aqueous medium (mix 1 part defoamer with 3 to 10 parts water, stirring gently until a uniform mixture is obtained). For long-term stability of dilutions below 4% active, care must be taken with the dilution formulation. In organic solvent formulation systems, pre-dilution in a compatible solvent makes dosing easier and improves PDMS distribution.

Suggested initial evaluation doses (technical data sheet):

• General initial evaluation: 200 to 500 ppm of the product as received in the foaming system.
• Wastewater and chemical processing operations: 10 to 20 ppm of the product as received.
• Adjustment: adjust use levels according to observed performance, starting at the low end of the range.

Indicative guide by system type (to be validated in the laboratory):

• Agrochemical formulations: on the order of 0.01 to 0.1% of formulation weight, added to the phase with the highest foam generation.
• Polymerization processes and reactive systems: on the order of 0.005 to 0.05% of system weight.
• Cleaner and detergent formulations: doses specific to each formulation, incorporated at the manufacturing stage.

These system ranges are indicative and must be confirmed through laboratory testing under actual process conditions.

Incorporation considerations: because of its viscosity, Silad X700 can be gently warmed (up to 40 – 50 °C) to reduce its viscosity and make dosing easier in automatic injection systems; higher temperatures are not necessary. In reactors with intense agitation or in milling processes, it can be added directly in small, repeated doses, letting the mixing energy distribute the PDMS. In water treatment, dose at the point immediately before foam formation for maximum efficacy with minimum consumption.

Silad X700 technical specifications

The Silad X700 we manufacture meets a consistent lot-to-lot quality profile, verifiable through a Certificate of Analysis (COA):

Chemical nature:
Silicone — polydimethylsiloxane (PDMS), self-dispersing

CAS number:
63148-62-9

Other names:
PDMS, dimethylpolysiloxane, polydimethylsiloxane, dimethicone

Appearance:
Colorless to slightly creamy white, opaque liquid (self-dispersing)

Active ingredient content:
Minimum 90%

Specific gravity at 25 °C:
0.94 – 0.95

Viscosity at 25 °C:
1,500 – 3,500 cP (10 rpm, spindle 63)

pH (1% solution) at 25 °C:
3.0 – 4.5

pH compatibility:
Alkaline, neutral and acidic systems

Quimiconsult SKU:
INPTF067

Every delivery of Silad X700 comes with its Certificate of Analysis (COA) per lot, Technical Data Sheet (TDS), Safety Data Sheet (SDS) and additional regulatory documentation as required by the customer for audits and supplier approval processes.

Compatibilities and considerations

Silad X700 is compatible with non-aqueous systems and with organic solvents (aromatics, aliphatics, esters and solvent blends) typical of industrial and EC agrochemical formulations, as well as with a wide pH range (alkaline, neutral and acidic). As a non-polar polymer with low surface energy, it distributes well in organic solvents at use concentrations, and it can also be prepared as a dispersion in an aqueous medium.

It requires precautions or specific verification with: extreme temperatures during prolonged storage; very intense, prolonged shear; and systems sensitive to the presence of silicone (coatings at risk of surface defects — in that case, evaluate the dosage or consider the silicone-free alternative Silad AF100). As with any defoamer, a compatibility and performance test under the system's actual conditions is recommended before full-scale implementation.

Packaging, storage and shelf life

Packaging: Silad X700 is available in 20 kg and 50 kg jerrycans, 200 kg drums and 1,000 kg containers (IBC/tote) for high-volume users or distributors, as well as samples for technical evaluation before purchase. All containers are labeled in accordance with the Globally Harmonized System (SGA/GHS).

Storage: to guarantee product quality, the container must be tightly closed when not in use. Store at controlled room temperature in a dry place, away from direct sunlight and heat sources, and avoid prolonged exposure to extreme heat or freezing, which can cause the product to separate. If separation occurs, stir the contents to recombine the phases and use as normal.

Shelf life: the official expiration date and shelf-life conditions are indicated on the original container and on the Certificate of Analysis (COA) for the corresponding lot.

Safety, handling and regulatory considerations

Silad X700 must be handled following the recommendations of its current Safety Data Sheet (SDS). As general good industrial handling practice, the use of personal protective equipment (PPE) is recommended: chemical safety goggles, industrial gloves (nitrile or equivalent), appropriate work clothing and work in adequately ventilated areas. Wash hands and arms after handling the product.

Spill management: defoamer spills are slippery and pose a fall risk. Contain with inert absorbents (vermiculite, sand, absorbent pads), collect and dispose of in accordance with current waste legislation, and wash the area with water and detergent to remove residues.

GHS classification, hazard statements (H phrases) and precautionary statements: this section is only a general handling guide. The full classification under the Globally Harmonized System (GHS), hazard statements, precautionary statements, first aid and labeling in accordance with NOM-018-STPS-2015 must be taken from the product's current Safety Data Sheet (SDS), which is supplied with every delivery. Always consult the latest SDS before use.

Frequently asked questions about Silad X700

Are dimethicone, PDMS and dimethylpolysiloxane the same as Silad X700?

Dimethicone, PDMS, dimethylpolysiloxane and polydimethylsiloxane are different names for the same silicone polymer (CAS 63148-62-9). Silad X700 is the commercial formulation of that compound at a minimum 90% active concentration, in the viscosity (1,500 – 3,500 cP) and pH (3.0 – 4.5) format suited for use as an industrial defoamer in non-aqueous systems. If you are looking for dimethicone or PDMS for aqueous systems, the 20% silicone emulsion Silad B300 (or Silad B600) may be the most suitable option in that context.

What is Silad X700 and what is it used for?

Silad X700 is a concentrated silicone-based (PDMS) defoamer with a minimum of 90% active ingredient, manufactured by Quimiconsult, for suppressing and preventing foam in non-aqueous systems and demanding processes: alkaline cleaners and heavy-duty detergents, agrochemical formulations (SC, EC, WG and milling), treatment of water with a high surfactant load, polymerization processes and plastics manufacturing, chemical and petroleum processing, and specialty chemicals.

Is Silad X700 compatible with solvent-based agrochemicals such as ECs?

Yes. Silad X700 is compatible with the organic solvents typical of EC (emulsifiable concentrate) formulations: aromatics, aliphatics, esters and solvent blends. As a non-polar PDMS with low surface energy, it distributes well in organic solvents at use concentrations. For formulations with specific compatibility or accelerated stability requirements, our technical team can run laboratory tests before full-scale production.

What is the real cost difference between Silad X700 and a 20% silicone emulsion?

Silad X700 has a higher price per kilogram than a 20% emulsion, but its active content is approximately 4.5 times higher per kilogram (90% versus 20%): a 100 g dose of Silad X700 provides an active PDMS content similar to about 450 g of 20% emulsion. As a result, the real cost per unit of defoaming efficacy is usually comparable or lower. Our team can help you with a cost-per-dose analysis for your specific system.

How does Silad X700 differ from Silad X100?

Both are high-concentration, self-dispersing silicone concentrates. Silad X700 has a minimum of 90% active, pH 3.0 – 4.5 and viscosity 1,500 – 3,500 cP, geared to non-aqueous systems and processes requiring durability in alkaline media. Silad X100 is 100% active, pH 5.0 – 7.0 and viscosity 2,000 – 6,000 cP, geared to oil-based and mixed oil-water systems as well as aqueous ones. Our technical team can help you choose the most suitable one for your process.

How is Silad X700 dosed?

For a general initial evaluation, 200 to 500 ppm of the product as received is recommended; for wastewater and chemical processing, 10 to 20 ppm. For incorporation into formulations (agrochemicals, cleaners, reactive systems), doses are specific to each system and must be determined through laboratory testing.

Can it be used diluted?

Yes. It can be used as received, diluted with PPG, or prepared as a dispersion in an aqueous medium (1 part defoamer in 3 to 10 parts water). For dilutions below 4% active, care must be taken with the long-term stability of the dilution. In organic solvent systems, pre-dilution in a compatible solvent makes distribution easier.

Can Silad X700 be used in food-contact formulations?

Silad X700 is an industrial grade defoamer, formulated for industrial use in non-aqueous systems, not for direct application in contact with food. Although the PDMS active is recognized as an additive under various regulatory frameworks, if your process requires a food grade defoamer for direct food contact, use the food grade versions of the family (Silad 210 FG or Silad Powder FG) or consult our technical team.

Is it safe to handle?

It should be handled with the recommended PPE (nitrile gloves, chemical safety goggles and appropriate clothing) and good ventilation. The full GHS classification, hazard statements and first aid must be taken from the product's current SDS.

Where can I buy Silad X700 and what packaging is available?

Silad X700 is available from stock in Monterrey, Nuevo León, with shipping coverage throughout Mexico. Packaging: 20 kg and 50 kg jerrycans, 200 kg drums and 1,000 kg containers (IBC/tote), as well as samples for technical evaluation. At Quimiconsult we are direct manufacturers, with complete technical documentation (TDS, SDS, COA per lot) and technical support. Request a quote or a sample at +52 (81) 8105 0063.

Other names and search terms related to Silad X700

Silad X700 is a Quimiconsult brand. The active and the product type are known under various chemical names and functional descriptions:

silicone-based defoamer, silicone-based defoamers, concentrated defoamer, concentrated silicone defoamer, defoamer for non-aqueous systems, non-aqueous defoamer, PDMS, polydimethylsiloxane, dimethylpolysiloxane, dimethicone, polidimetilsiloxano, buy polydimethylsiloxane, buy PDMS, industrial dimethicone, silicone oil, silicone fluid, silicone defoamer, concentrated defoamer, foam suppressor, foam controller, foam control agent, antifoaming agent, defoamer for alkaline cleaners, defoamer for heavy-duty detergents, defoamer for agrochemicals, defoamer for EC emulsifiable concentrates, defoamer for SC suspension concentrates, defoamer for milling, defoamer for water treatment, defoamer for wastewater, defoamer for polymerization, defoamer for plastics, defoamer for chemical processing, defoamer for petrochemicals, defoamer for petroleum processing, Silad X700 price, buy Silad X700, Silad X700 Mexico, silicone-based defoamer Mexico, defoamer manufacturer Mexico, defoamer supplier Monterrey, Silad defoamer, Silad antifoam.

These variations help buyers, formulators, process engineers, plant managers, quality departments and R&D departments locate Silad X700 within Quimiconsult's defoamer line.

Why buy Silad X700 from Quimiconsult?

Quimiconsult is a Mexican company with more than 30 years of experience in specialty chemicals for the food, pharmaceutical, cosmetic, animal nutrition, agricultural and industrial sectors. When you buy Silad X700 from Quimiconsult you get:

• An in-house manufactured product, with an R&D laboratory, internal quality control and lot-to-lot consistency.
• A concentrated silicone-based defoamer with a minimum of 90% active, for non-aqueous systems and demanding processes.
• The complete Silad line (B300, B600, X100, X700 and the food grade and powder versions), which lets us steer you to the technically correct product for your system without forcing you to adapt your process to a single format.
• Capability to develop custom variants (viscosity, adjusted active concentration, blends of PDMS with other defoamers or ready-to-dose solvent dilutions).
• Direct technical support from the manufacturer, with advice on dosing, point of addition and evaluating the product in your process.
• Complete regulatory documentation (COA per lot, TDS, SDS) for audits and supplier approval.
• Availability from Monterrey, Nuevo León, in jerrycans, drums and containers, with shipping throughout Mexico.

Request your Silad X700 quote or sample

Does your non-aqueous system, your production of alkaline cleaners and heavy-duty detergents, your agrochemical formulation (SC, EC, WG), your polymerization or plastics manufacturing process, your chemical or petrochemical process, or your treatment plant for water with a high surfactant load need a concentrated silicone-based defoamer with maximum efficiency per dose?

We also offer the complete line of Silad defoamers (silicone emulsions, X100 self-dispersible concentrate, organic-based, food grade and powder). Contact us and we will gladly analyze your application, recommend the optimal dosage and point of addition, advise you on which product in the family fits your process, and deliver a comprehensive solution with complete technical documentation, application advice and timely delivery anywhere in Mexico. If your process requires a variant of Silad X700 with a different viscosity, adjusted active concentration or a ready-to-dose dilution in a specific solvent, our laboratory can develop it. We manufacture in Mexico with domestic production, our own inventory and short lead times, and we serve the entire country —including Monterrey, Mexico City, Guadalajara, Puebla, Querétaro, San Luis Potosí, Saltillo, Chihuahua and the Bajío region—. Call us at +52 (81) 8105 0063 or visit us at Privada El Encino No. 750, Col. LaGrange, San Nicolás de los Garza, N.L., CP 66490.

Related products and the Silad defoamer family

• Silad X100 — 100% active, self-dispersible PDMS defoamer concentrate for oil-based, mixed, non-aqueous and aqueous systems.
• Silad B300 — low-viscosity silicone defoamer emulsion (20% active) with acidic to neutral pH (3.5 – 5.0); the equivalent water-based option.
• Silad B600 — very low-viscosity silicone defoamer emulsion (20% active) with neutral to alkaline pH (5.0 – 8.0).
• Silad B700 — 100% active concentrated silicone defoamer for water treatment, alkaline cleaners, CIP and recirculation systems.
• Silad 210 / Silad 210 FG — silicone emulsion foam control agents; the 210 FG version is food grade, kosher, manufactured in an SQF plant.
• Silad Powder FG — food grade powder defoamer for dry mixes and food processes.
• Silad AF100 — silicone-free, organic-based concentrated defoamer for silicone-sensitive processes and products.

Related categories: Industrial defoamers and foam control agents · Silicone-based defoamers for non-aqueous systems · Agrochemical formulation aids · Inputs for industrial cleaning solutions · Inputs for chemical and petrochemical processes · Inputs for polymerization and plastics · Inputs for industrial water treatment.

Not sure which Silad defoamer is right for your system? Contact us and we will help you select the right technology (silicone emulsion, self-dispersing concentrate, organic-based or powder), concentration and format for your system (aqueous or non-aqueous), your pH, your temperature and your type of process.